Sitecom WL-203 Manual de usuario descargar pdf (Pagina 39)

Please check www.sitecom.com for up to date drivers & utilities, manuals and support

9.3.2 TCP/IP Configuration

To set the MFP server’s TCP/IP configuration and connect TCP/IP network, please see < 4.2.5 Setting

the IP address Using the Server’s Web Pages > for details.

9.3.3 Protocols Configuration

• LPR (Line Printer Remote) Printing: select or clear LPR Printing support. It is enabled in

Factory Default.

• IPP Printing: select or clear IPP Printing support. It is enabled in Factory Default.

• Raw TCP/ Jet Direct Printing: select or clear Raw TCP / jet Direct Printing support. It is

enabled in Factory Default and set some parameters as below :

• TCP Port : Set TCP port for the printer of USB1 port (default: 9100)

• TCP Port : Set TCP port for the printer of USB2 port (default: 9101)

• SMB/CIFS Print/File Server: select or clear SMB/CIFS Print/File Server support. It is

enabled in Factory Default

• Internet Access: select or clear Enable Internet Access support. If you clear the item, you

do not allow that users can access your SMB/CIFS server via Internet. If you select the item,

you allow Internet users can access your storage using the SMB/CIFS protocol.

• Server Authentication: select or clear Server Authentication support. Select the item, if

you want to share your storage or printer with user level security which requires user name

and password to login. If you clear the item, your storage will be shared without security.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Sin comentarios

Sitecom WL-203 Manual de usuario Pagina 39